Blog


Pallet TV Stand

Kelsey Cahill

Download Plans *The plans include a material cut list, a list of necessary tools & hardware, assembly directions, and dimensions.

Build your own pallet tv stand! The PDF plans include a material cut list, a list of necessary tools & hardware, assembly directions, and dimensions. The overall dimensions of the tv stand are 45”W x 15”L x 21”H.

This entire project was constructed from pallet boards. Before beginning this build, break down a few pallets and set aside the lumber. Remember, always work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Also, follow me on Pinterest or Instagram to get the first look on what I am working on next.

Shopping List

Tools

Don’t have a specific tool? Click the item below to purchase it from Amazon.

Instructions

Step

First build the table top and middle/bottom shelves. Glue each of the boards together and clamp till wood glue dries, Then, use 3/4” screws to fasten the cross member for added weight support. NOTE: The middle and bottom shelves have the same measurements.



Table Top
Pallet Tv Stand (Table Top)
Middle Shelf
Pallet Tv Stand (Middle Shelf)
Bottom Shelf
Pallet Tv Stand (Bottom Shelf)
Step

Connect the tabletop and shelves to each leg. You can use 1” screws for a stonger hold. To prevent splitting, predrill the holes before putting in screws. NOTE: If you want to hide the screws for a cleaner look use pocket holes on the inside for each level.

Front
(Repeat for the back)
Pallet Tv Stand (Front)
Step

Add trim pieces. Use a brad nailer to attach the trim pieces to the outside of each shelf.

Front
(Repeat for the back)
Pallet Tv Stand (Front)
Side
(Repeat for each side)
Pallet Tv Stand (Side)
Step

Add divider and cross members. Slide in the divider and secure it with brad nails from the top and bottom. Then, nail each cross member in place. Finish the look with wicker baskets for storage. (11 1/2” L x 10” W x 9” H)

Pallet Tv Stand (Front)
Side
(Repeat for each side)
Pallet Tv Stand (Side) Pallet Tv Stand
Download Plans *The plans include a material cut list, a list of necessary tools & hardware, assembly directions, and dimensions.

Comments

12 responses to “Pallet TV Stand

  1. Do you mind if I quote a few of your posts as long as I provide credit and sources back to your site?

    My website is in the very same niche as yours and my visitors would really benefit
    from a lot of the information you present here. Please let
    me know if this ok with you. Thank you!

  2. Nice post. I was checking constantly this blog
    and I’m impressed! Very useful info particularly the last part 🙂 I care for
    such information a lot. I was looking for this
    certain information for a very long time. Thank you and best of luck.

  3. Magnificent beat ! I would like to apprentice while you amend your site, how can i subscribe for a blog web site?
    The account helped me a acceptable deal. I had been a little bit acquainted of
    this your broadcast offered bright clear concept

  4. I just could not go away your website prior to suggesting that I actually enjoyed the standard information an individual provide
    for your visitors? Is going to be back steadily to check up on new posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Shop My Favorites


Shop My Favorites